91精品国产人妻一区二

销售德国翱惭搁翱狈密封型微动开关，惭驰2狈/24痴顿颁

Weight Approx. 2 g (for pin plunger models with terminals)
Note.The data given above are initial values. *1.
Ideal for autos, automatic vending machines, refrigerators,
ice-making equipment, bath equipment, hot-water supply systems,
air conditioners, and industrial equipments,
which require high environmental resistance.
Models available with UL, CSA, and VDE safety standard compliance.
Item Model D2SW-3 models D2SW-01 models Permissible operating speed 0.1 mm to 1 m/s
(for pin plunger models) Permissible operating frequency
Applying excessive external force laterally may cause deformation of terminals and may damage the housings.
1,000 VAC 50/60 Hz for 1 min
600 VAC 50/60 Hz for 1 min 
Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz for 1 min 
Vibration resistance *2 Malfunction 10 to 55 Hz, 1.5 mm double amplitude Shock resistance
 Destruction 1,000 m/s2 {approx. 100G} max. Malfunction *2 300 m/s2 {approx. 30G} max.
Durability * 3
Mechanical 5,000,000 operations min. (60 operations/min) 
Mechanical 300 operations/min Electrical 60 operations/min
Insulation resistance 100 mΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value)
For terminal models 30 mΩ max. 50 mΩ max. For molded lead wire models (300mm) 50 mΩ max. 70 mΩ max.
For molded lead wire models (1,000mm) 200 mΩ max. 250 mΩ max.
Dielectric strength *1
first insert the lead wire conductor through the terminal hole and then conduct soldering.

销售德国翱惭搁翱狈密封型微动开关，惭驰2狈/24痴顿颁
 *2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models,
making this switch ideal for places subject to water spray or excessive dust.
• Connecting to Quick-connect Terminals Wire the quick-connect terminals (#110) with receptacles.
 Insert the terminals straight into the receptacles.
Between terminals of the same polarity
The values for dielectric strength shown are for models with a Separator (refer to "Basic Switch Common Accessories").
d Subminiature Basic Switch  Conforming to IP67 (Excluding the terminals on terminal models)
Use of epoxy resin assures stable sealing,
For molded lead wire models IEC IP67 Degree of protection against electric shock Class I Proof tracking index (PTI)
175 Ambient operating temperature –40°C to +85°C (at ambient humidity of 60% max.) 
(with no icing or condensation) Ambient operating humidity 95% max. (for +5°C to +35°C)
they apply at the total travel position. Close or open circuit of the contact is 1 ms max.
*3. For testing conditions, consult your OMRON sales representative.
 Connecting to Solder Terminals When soldering the lead wire to the terminal
200,000 operations min. (30 operations/min) (125 VAC 3 A) 100,000 operations min. (30 operations/min) (250 VAC 2 A)
200,000 operations min. (30 operations/min)
Degree of protection
For terminal models IEC IP67 (excluding the terminals on terminal models)
 Complete the soldering at the iron tip temperature between 350 to 400°C within 5 seconds,
and do not apply any external force for 1 minute after soldering.
Soldering at a excessively high temperature or soldering for more than 5 seconds may deteriorate the characteristics of the Switch.
Between terminals and non-current-carrying metal parts 1,500 VAC 50/60 Hz for 1 min