91精品国产人妻一区二

厂惭颁3通气控阀,厂惭颁3通气控阀原理
④缸速靠进气节流控制，而且应逆时针回转压
力调整用的急速供气阀，使气缸在到达行程
末端后，压力急速上升。调整后再紧固锁母。
注) 不要过分逆时针回转压力调整用急速供气阀，
以防止气缸急速伸出。
Easy operation with a push button.
• Piping parts are available in two types: with
One-touch fittings and with Rc thread
Applicable tubing diameter: ø6, ø8, ø10,ø12
缸内压力排出后再供气，由于厂厂颁阀有固
定节流孔，属于进气节流，故气缸动作可
防止急速伸出。到达行程末端后压力急
升。可由压力调整用针阀逆时针回转来调
整。调整后必须用锁母锁紧

厂惭颁3通气控阀,厂惭颁3通气控阀原理
Connection thread Rc: 1/4, 3/8
• Residual pressure release time: Approx. 7
seconds (time required for the pressure to
be 0.5 MPa to 0.05 MPa)
Example of air cylinder residual
pressure release time
是带快换接头的速度控制阀
(直通型)的固定用管座。
安装自由度高。
Residual pressure in the cylinder
can be easily released with one
push of the push button.
Example of circuit diagram (Residual
exhaust of air cylinder)